If you are using only one pair of TMC interconnects in your
system, it does not really matter if you use the Yellow Label, or the
White Label. Either one of them will out-perform most other commercial
Hi Fi cables at any location.
If you are wiring the entire system with TMC, we would recommend as
the starting point using the Yellow Label for the pre amp to power amp
connection, and the White Label for all other connections (including
Many happy TMC users are having funs trying different combinations of
Yellow and White label in their system. Many returns to the original
recommendation, some do not. (The Yellow Label is certainly the
choice for connections to your power amp and Sub. With other
connections, it sometimes depends more on personal taste and the
system, to choose between a White Label or a Yellow Label)
Start with our recommendation, we think this will give you the best
vocal, and bass, and have funs trying other combinations to find the
best for your ears and your heart.
We also recommend using our TMC Gold Label Reference Speaker cable to
get the most musical performance from your system.
recommended for all
connections before and to pre-amp
Click here to read
of our White Label Interconnects
posted by our customers at audioreview.com
Please read the fine print before scrolling down to place an order
Our name says it all: TMC = the-music-cable = truly musical cables
these are wonderfully effortless and superbly neutral and natural cables;
with full bodied real soundstage of great depth and extension and dead quiet
music is with feelings and liveliness, and excellent separation of instruments,
very lively and engaging... no fatigue after listening to everything under the
sun for hours!!
Be warned: the use of our cables to listen to music can be addictive.
And if you do not have the time, please do not switch these cables on
as you will be late for your next appointment!!
These cables are
designed to carry signal
and to preserve musical integrity.
By design, we offer one of the best (if not the best) Hi Fi cable
system for modern day use.
Please do not hesitate to contact us should you have further
questions, or further requirements.
3.00 ohms/1000 ft (9.80
2.00 ohms/1000 ft (6.50 ohms/1000 meters)
24.20 pF/ft (79.40 pF/meter)
0.061 µH/ft (0.200
Recommended Retail Price: US$220/meter pair
Factory Direct Price:
per meter pair
Buy Now With
(@ US$106 per meter pair)
Shipping and handling charges:
1) Flat rate S&H of US$15 per International order (shipment outside of
Orders of US$420 and over will be sent by EMS, Australian Express Post; which takes
3-5 working days to reach most cities from here (With tracking number).
Orders of less than US$420 will be sent by Australian Insured Air Mail; which
takes 7-10 working days to reach most cities from here. This
service offers no tracking number; but a signature is needed for
2) Flat rate S&H of US$5 per local order (shipment within Australia).
(For shipments within Australia, we will send a separate
for 10% GST)
Please make sure that there is only
one S&H in your shopping cart.
(If you made a mistake,
please don't worry, as we will promptly refund to you the extra
S&H before shipment.)
Please do not hesitate to contact us should you
have further questions,
or further requirements.
*no moving parts
A single solid copper
tubing is used as the shielding (for ground connection)
A single copper-clad solid center conductor is used for signal
Quality low density, closed-cell air-foam dielectric is used. The
dielectric is bonded to the outer and the center conductor to
eliminate all relative movement.
No mesh, no relative movements, no moving parts.
No intermodulation distortion.
* solid copper
The solid copper
tubing (the outer conductor) also provides the best protection against
electromagnetic and radio frequency interference (EMI & RFI). Older
designs of cable shielding may fast become inadequate in our modern
day environment, especially in busy city where there is a huge
increase in the use of telecommunication and electronic equipment.
* highly polished pure
copper-clad aluminium single solid center conductor
The aluminum is used
mainly as a support, and is relatively non-conductive
to the music signal the cable carries in this
application. This arrangement forces most if not all of the signal to
flow along the thin copper clad tubing, thereby putting “skin-effects”
well under control.
We use only premium
quality gold-plated, teflon insulated, locking type RCA plug and lead
free silver solder.
These cables are
designed to preserve signal integrity.
By design, we offer
one of the best (if not the best) Hi Fi cable system for modern day
return to top